J2112A High Current Injector
J2170B High PSRR Power Adapter
1 Year Warranty
|J2112A||J2112A High Current Injector||$1,995.00||Add to Cart|
The J2112A Current Injector is an extremely versatile tool addition to the Picotest Signal Injector line-up. Coupled with the G5100A AWG, or other equivalent function generator, it is capable of performing small and large-signal load steps up to 40MHz, with up to 20ns rise/fall times, and with currents up to 1amp. Rise and fall times can be controlled and arbitrary waveforms can be used to drive the injector producing load current profiles of virtually any characteristic pattern. This is ideal for emulating all types of load conditions, including high speed digital circuit loading, battery discharge profiles, or spontaneous current spikes.
When coupled with a network analyzer, the Current Injector can be used to measure the output impedance of all types of circuits and systems including power supplies, voltage regulators, power buses, and batteries. It can be used to NON-INVASIVELY measure the stability of a combined input filter /negative resistance of a switching power supply or the phase margin of a linear or switching regulator WITHOUT the need to break the control loop.
It also supports applications in the measurement and extraction of transistor data, including current gain, Ft, and many other dynamic performance parameters. In RF and instrumentation circuits it can be used to provide constant current biasing for class A amplifiers and buffers.
The Ultimate Controllable Current Source
The controlling input is an arbitrary user controlled DC+AC signal that can be taken from either a signal generator or network analyzer. A built-in bidirectional bias current enables Class A operation for use with network analyzers.
The output current is reduced 40dB from the input signal, resulting in 10mA/V scaling. The current monitor output port is designed to be terminated into 50 Ohms and can be used with the network analyzer, an oscilloscope or a DMM to monitor the output current of the injector on a 1A/V scale.
|Max Input Voltage DC+AC||+5||V|
|Max Output Current||+1||A|
|Min Output Current||24||mA|
|Max Output Voltage||+/-10.5||V|
|Offset Current (typical)||+240||mA|
|-3dB Bandwidth (-10dBm)||DC-50||MHz|
|Absolute Maximum Voltage||< 50VAC and 75VDC|
|Dimensions (box only)
(box + connectors)
|109.22 mm x 89.66 mm x 50.80 mm
4.30” x3.53” x 2.00”
122.68 mm x 89.66 mm x 50.80 mm
4.83” x3.53” x 2.00”
|Weight||0.210 kg / 0.463 lbs|
Caution: To avoid equipment damage and/or severe injuries or death ensure that the absolute maximum ratings are observed and not exceeded at all times.
Copyright © 2018 Picotest. All rights reserved.