info@picotest.com
1-877-914-7426
IMG-LOGO

SUPPORT

Welcome to the Picotest Support Section!

If you need further assistance please call us at 1(877) 914-PICO or fill out and submit the form on our contact page.

injectors support information

IMG-PRODUCT
J2151A PerfectPulse Signal Generator and TDR
IMG-PRODUCT
Signal Injectors
IMG-PRODUCT
J2100A-J2101A Injection Transformers
IMG-PRODUCT
J2102A Common Mode Transformer
IMG-PRODUCT
J2111A Current Injector
IMG-PRODUCT
J2110A Solid State Injector and J2140A Attenuator
IMG-PRODUCT
J2120A Line Injector
IMG-PRODUCT
J2112A High Current Injector
IMG-PRODUCT
J2180A 0.1Hz -100MHz Ultra Low Noise Preamp
IMG-PRODUCT
EM-6992 Hand Held Probes Set
IMG-PRODUCT
Picotest Full Product Brochure
IMG-PRODUCT
Signal Injectors
IMG-PRODUCT
USB Harmonic Comb Injector 1.1
IMG-PRODUCT
VRTS03 Distributed System Demo Board V1.0

Probes/Amps/Software

IMG-PRODUCT
Picotest GaN Probe P2000A
IMG-PRODUCT
Beehive 100 Series EMC Probes
IMG-PRODUCT
Beehive 150A Probe Amplifier
IMG-PRODUCT
Electro-Metrics EM-6992 Hand Held Probes Set
IMG-PRODUCT
Electro-Metrics EM-6992 Near-Field Probes Set
IMG-PRODUCT
PEM CWT Ultra Mini AC Current Probe
IMG-PRODUCT
Picotest PDN Probes P2100A and P2101A

OMICRON Lab Bode

Bode Analyzer Suite
IMG-PRODUCT
Bode Analyzer Suite (Full installer 32 bit & 64 bit)
IMG-PRODUCT
Bode Analyzer Suite - 32 Bit (32 bit installer only)
IMG-PRODUCT
Bode Analyzer Suite - 64 Bit (64 bit installer only)
IMG-PRODUCT
Bode Automation -64 Bit (Automation interface)
Manuals & Documentation
IMG-PRODUCT
User manual for Bode 100 and BAS 3.11
IMG-PRODUCT
User manual for Bode 100 and BAS 3.00
IMG-PRODUCT
Quick start guide for Bode 100 and BAS 3.00
IMG-PRODUCT
Bode 100 product brochure
IMG-PRODUCT
B-WIT 100 product brochure
IMG-PRODUCT
User manual for Bode 100 and BAS 2.X
Version History

Version History

This page lists the evolution of the Bode Analyzer Suite from 2005 until today:

V3.12 (2017-11-06)

  • Averaging feature
  • Smith-chart in fixed-frequency measurements
  • Several bug-fixes (see: Version information)

V3.11 (2017-08-14)

BAS 3.11 further improves BAS 3.00 and brings new features:

  • Automatic Resonance-frequency and Q-factor calculation (especially for RFID and NFC measurements)
  • Link cursors to evaluate e.g. Gain slope at crossover frequency
  • Long memory names are displayed via mouse-over
  • For a detailed list of improvements and known issues, see: Version information

V3.0 (2017-04-12)

BAS v3.0 is a completely new Bode Analyzer Suite that brings the following improvements and new features:

  • Measure up to 50 MHz with your existing Bode 100
  • Improved work-flow especially for memory curves
  • Predefined measurement modes fitting your measurement application
  • 7 Impedance measurement modes to measure impedance from mO to MO
  • Attach cursors to memories
  • Perform Shunt-Thru and Series-Thru measurements
  • De-embed connections, probes and mounts using Open, Short and Load calibration in all impedance measurement modes
  • Perform swept or fixed frequency measurements in all modes
  • Export CSV, Excel and Touchstone files
  • Save your measurement results as a PDF print-report
  • Use multiple Bode 100 devices on one PC
  • Completely new and improved Automation Interface with COM and .NET access

V2.43 SR1 (2014-11-27)

  • Fixed issue with Warm-Up (Automation Interface)
  • Improved reaction speed of new Advanced PM Calculation
  • BAS creates logfile for better customer support
  • Release information and details

V2.43 (2014-09-04)

  • Source On/Off changed in Automation Interface
  • New "Non-Invasive Phasemargin Calculation" method
  • BAS creates logfile for better customer support
  • Several performance improvements and bugfixes

V2.42 (2014-01)

  • Automatic optimizing of the sweep curve (Auto Optimize)
  • Drag & drop support for shaped level dialog
  • New bode file type with .bodex extension
  • Save and load of calibration in the Automation Interface
  • .boa file is no longer supported in the Automation Interface
  • New Automation Interface methods to increase measurement speed

V2.41 SR1 (2013-03)

  • Tg calculation to impedance/reflection measurements added
  • Unwrapped phase display improved
  • Memory trace csv export issue fixed
  • Minor bug fixes

V2.41 (2012-12)

  • Added chart annotations
  • Multiple memory traces added
  • Data+Memory, Data-Memory, Data*Memory calculation
  • Zipped bode file is now available (*.bodz)
  • Check online for updates of the BAS
  • Send bode file to support feature added
  • Possibility to clear the internal device calibration
  • Memory and trace styles can be changed in context menu
  • Trace markers can be enabled
  • Improved shaped level display
  • Enhanced cursor grid
  • Cosmetic bug fixes

V2.40 (2012-08)

  • Internal Device Calibration is stored to the PC to reduce startup time
  • Improved 1 Hz / 10 Hz start frequency behavior
  • Calibration is performed with the selected output level (inlcluding shaped level)
  • CSV export offers possibility to start an external program
  • Trace data can be copied to the clipboard
  • Phase gridlines can be selected to be multiples of 10, 30, 45 and pi
  • Open recently accessed files enabled
  • Drag and drop of *.bode files enabled
  • Calibration state is visible in status bar
  • Improved "Optimize" scaling algorithm
  • Copy chart to clipboard can include cursor table
  • Options dialog redesigned
  • Cursor color and style can be changed
  • Font size for documentation purpose can be changed
  • Improved 125% and 150% readability
  • Multiple instances of the Bode Analyzer Suite can be started
  • Toolbars can be switched on and off
  • Automation Interface structure redesigned
  • LabVIEW library adapted to the new Automation Interface structure
  • Minor Bug fixes

V2.33 SR5 (2012-07)

  • Internal Calibration is stored in the Automation Interface
  • Resolved impedance measurement issue from 5-20 kHz
  • Minor bug fixes

V2.33 (2012-03)

  • Cursor position stored in Bode file
  • Nyquist Diagram added
  • New Cursor functions Jump to Zero, Jump to Value and Jump to next Value added
  • Migration to .net Framework 4.0
  • Minor bug fixes

V2.32 (2011-07)

  • New commenting feature added for all measurement modes
  • Improved Calibration time out handling for low receiver bandwidths
  • Minor bug fixes

V2.31 (2011-01)

  • Phase Margin Calculation for non-invasive stability measurement of power supplies added
  • Logarithmic scaling and improved zoom possibilities for shaped level setup screen added
  • Improved visibility of gridlines
  • Minor bug fixes

V2.30 SR1 (2010-10)

  • Improved Clipboard Export (better grid, better curve separation between data and memory)
  • New manual added to CD-ROM in pdf Format
  • Minor bug fixes

V2.30 (2010-08)

  • Logarithmic scaling of Y axis added
  • New Impedance Adapter mode for the use with the B-WIC and B-SMC adapters
  • RLC Q Sweep to display capacitance, inductance and Q factor in the frequency sweep mode
  • Full Speed mode - quicker measurements ad low frequencies and low receiver bandwidths
  • Averaging, Min Hold, Max Hold trace functions added
  • Selective unwrapped phase function added
  • New charting software implemented
  • Improved control of the Bode output source (on/off/auto)

V2.23 (2010-01)

  • Improved Phase performance at low frequencies
  • Data/Memory function for impedance and admittance fixed
  • Enhanced CSV Export (more data exported)

V2.21 (2009-01)

  • Unwrapped Phase mode added
  • Bode File name now shown in print report
  • Automation Interface extension:
    • External Coupler Mode support
    • Possibility to Load/Save Bode Files via Automation Interface
    • Control of Shaped Level via Automation Interface
    • Activation of Unwrapped Phase in AI
    • VSWR Mode support
    • Definition of individual frequencies for sweep now possible

V2.2 (2007-12)

  • Print Reporting added (Print out measurement results & equipment settings)
  • Export measurement data to Clipboard including equipment settings added
  • External Coupler mode for impedance measurements added
  • Shaped Level function for stability analysis of control loops added
  • Measurement Range extended down to 1 Hz
  • VSWR Mode added
  • Windows support extended to: Vista, Vista x64, Win XP x64
  • Jump to Min/Max Cursor Function added
  • some cosmetic surgeries done (Wiring Pictures, About Dialog, …)

V2.01a (2006-10)

  • OLE compatible automation interface for the integration of Bode 100 into automatic measurement setups
  • Two calibration methods:
    • User Calibration - to reach highest accuracy by calibrating every single frequency point
    • Probe Calibration - for flexible operation; allows change of frequency settings without the need of re-calibration
  • Store & retrieve Bode 100's settings, measurement results and calibration in *.Bode (XML) file format
  • Export measurement data in CSV format allows easy data processing with tools like Excel™ and MatLAB™
  • Serial and parallel equivalent circuits displayed in the impedance measurement mode up to 16501 measurement points supported frequency sweep mode

V1.0 (2005-03)

  • The historic initial version of the Bode Analyzer Suite.

Power Supplies

IMG-PRODUCT
P9610A/11A
IMG-PRODUCT
P9610A/11A

M3500A/M3510A

IMG-PRODUCT
M3500A (VISA Required)
IMG-PRODUCT
M3510A (VISA Required)
IMG-PRODUCT
M3500A/M3510A on (Windows 2000 / XP/ 7)
IMG-PRODUCT
Scanner Card-TOOL
IMG-PRODUCT
M3500A
IMG-PRODUCT
M3510A
IMG-PRODUCT
M35XXA
IMG-PRODUCT
OPT01 10 Channel Scanner Card
IMG-PRODUCT
OPT09 20 Channel Scanner Card
IMG-PRODUCT
OPT07 Kelvin Probe Set
IMG-PRODUCT
OPT08 4 Wired Test Lead
IMG-PRODUCT
OPT12 10 Channel Thermocouple & RTD Scanner Card
IMG-PRODUCT
M3500A ( VB )
IMG-PRODUCT
M3500A ( VB 2005 )
IMG-PRODUCT
M351XA ( VB )
IMG-PRODUCT
M3500A ( VC++ )
IMG-PRODUCT
M3500A ( C# 2005 )
IMG-PRODUCT
M3500A ( VC 2005 )
IMG-PRODUCT
M351XA ( VC )
IMG-PRODUCT
M3500A ( VB )
IMG-PRODUCT
M3500A ( VB 2005 )
IMG-PRODUCT
M351XA ( VB )
IMG-PRODUCT
M3500A( VC++ )
IMG-PRODUCT
M3500A ( C# 2005 )
IMG-PRODUCT
M3500A ( VC 2005 )
IMG-PRODUCT
M351XA ( VC )
IMG-PRODUCT
M3500A ( VB )
IMG-PRODUCT
M3500A( VC++ )
IMG-PRODUCT
M3500A( VB 2005 )
IMG-PRODUCT
M3500A( C# 2005 )
IMG-PRODUCT
M3500A ( VC 2005 )
IMG-PRODUCT
M3500A ( VB )
IMG-PRODUCT
M3500A ( VC )
IMG-PRODUCT
M3500A( LabView 7.1 )
IMG-PRODUCT
M3500A ( LabView 8.2 Later )
IMG-PRODUCT
M3510A/11A
IMG-PRODUCT
M3500A (VB)
IMG-PRODUCT
M3500A (VC++)
IMG-PRODUCT
M3500A (VB)
IMG-PRODUCT
M3500A (VC++)

G5100A

IMG-PRODUCT
G5100A
IMG-PRODUCT
G5100A
IMG-PRODUCT
Wavepatt Waveform Editor for G5100A
IMG-PRODUCT
G5100A Service Manual
IMG-PRODUCT
G5100A (20101123)
IMG-PRODUCT
G5100A_DM
IMG-PRODUCT
Picotest-APP-Wavepatt G5100A
IMG-PRODUCT
PICOTEST_G5100 G5100A
IMG-PRODUCT
G5100A_IVI for G5100A

U6200A

IMG-PRODUCT
U6200A
IMG-PRODUCT
U6200A-APP-FWUPdate
IMG-PRODUCT
U62XXA
IMG-PRODUCT
U6200A
IMG-PRODUCT
U6200A U62_Brochures
IMG-PRODUCT
U6200A

Setup Files

IMG-PRODUCT
1 port reflection - port 1
IMG-PRODUCT
2 port shunt GP
IMG-PRODUCT
2 port shunt - port 1 port 2
IMG-PRODUCT
NISM 1 port
IMG-PRODUCT
PSRR_REF03
IMG-PRODUCT
PSRR_VRTS1P5
IMG-PRODUCT
Reverse transfer VRTS1P5

ADS

IMG-PRODUCT
PDN Rogue Wave Workspace
IMG-PRODUCT
EESOF How to for Capacitors
IMG-PRODUCT
EESOF How to Model DCDC
IMG-PRODUCT
EESOF How to Select VRM

Copyright © 2018 Picotest. All rights reserved.