info@picotest.com
1-877-914-7426
IMG-LOGO

Non-invasive Stability Measurement


NISM for Stability Analysis

Control loop stability is critical to the performance of all systems, as it influences all closed loop parameters, as well as system noise. Unfortunately, in many instances, particularly in the cases of voltage references, fixed voltage LDOs, and integrated POLs, a Bode plot assessment is not feasible because there is no feedback loop access to the part. In other cases, the feedback loop is difficult to access because the hardware is integrated or would require cutting a PCB trace. In yet other cases, the devices either contain multiple control loops, with only one of them being accessible, or the order of the control loop is higher than 2nd order, in which case the Bode plot is a poor predictor of relative stability. A further complication is that in many portable electronics, such as cell phones and tablets, the circuitry is very small and densely populated leaving little in the way of access to the control loop elements. In these cases, the non-invasive stability margin (‘NISM’) assessment, which is derived from easily accessible output impedance measurements, is the only way to verify stability.

NISM Solution


NISM software

IMG-PRODUCT
Do you have NISM software ?

Vector Network Analyzer

IMG-PRODUCT
Do you have a vector network analyzer?

J2120A Line Injector

IMG-PRODUCT
What Line Injector is required?

Connections & Test Standards

IMG-PRODUCT
What accessories are available?

Customers interested in this measurement were also interested in:


Copyright © 2018 Picotest. All rights reserved.